One odd thing is that if I reinstall the Raid driver without the drive connected all goes well and the Device Manager reports a successful installation! Firmware, you may need, but it’s difficult to find. This was not so and although the drive did spin up, it was not recognised by the Windows software as a viable drive. You will want to use GPT software to partition those 2 large hard drives. I’m going to try a reversion to an earlier bios that actually involved the SATA software. Code 10 ‘ followed by an invitation to start the troubleshooter which I did.
|Date Added:||12 April 2016|
|File Size:||67.62 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
At the moment, I have both Samsung drives installed and everything else returned to its normal state with the drives non-functional.
The time now is Meghmala Replied on February 6, Page 1 of 2 1 2 Last Jump to page: I’m receiving no error message but the operating system’s volume control has no effect on the actual volume output. You may run the troubleshooter from the below mentioned link and check if you can get to the exact issue — Open the playing Audio troubleshooter – http: You can follow the question or vote as helpful, but you cannot reply to this thread.
Drivers For Free – Asrock Intel Socket P4v88 Audio and Sound Drivers
The Motherboard BIOS makes no mention of SATA drives except in the section on booting and then it is just a general switch to either have the SATA boot bios enabled or disabled – it is currently enabled and I will try things with it disabled as well so that I have covered all the angles.
Sorry this didn’t help.
Did this solve your problem? Thanks for the jumper info which I have now tried but it didn’t seem to make any difference. After I had tried this a couple of times with variations including trying the other drive, I shut down the system and disconnected the drive before restarting.
I next fitted a jumper to halve the data rate as per the Samsung blurb but this had no pv488 effect. What is the make and model of the computer? Just for completeness, I reinstalled the now partitioned and formatted Samsung drive into the PC in place of the Western Digital drive and managed to achieve the same result.
I’m going sounv try a reversion to an earlier bios that actually involved the SATA software. You may also refer to the below links and check if these help – Adjust sound level on your computer – http: One odd thing is that if I reinstall the Raid driver without the drive connected all goes well and the Device Manager reports a successful installation!
I do need to know if I have hit the drive size limit for XP in trying to add eound drives. How satisfied are you with this reply?
ASRock P4V88 – motherboard – ATX – Socket 478 – PT880
Have I got a concept problem? This site in other languages x. Hot plugging the SATA drive which is supposed to be possible, froze the system except for a couple of seconds every couple of minutes whilst hot unplugging the drive restored operation as previously.
If so, where do I get a driver that will work? Do you have speakers or headphones souhd to the computer?
P4V88 and SATA HDDs
We receive spam notifications and will take immediate action! I have the same question 3. Appropriate cables were obtained and I fitted one drive and made the required connections, ran the VIA SATA Raid driver install program and expected that all would be well.
I haven’t actually had both of the drives connected together which may affect the RAID part of the software.
I also exchanged the motherboard for a similar one which I intended to use to build a printer server, and fitted all the ancilliary hardware and started that up with identical results to those previously obtained. This does suggest that the driver is at fault.
Will look some more. Have you done any recent changes on the computer? Code 10 ‘ followed by an invitation to start the troubleshooter which I did.
P4V88 and SATA HDDs I’ve taken note of the comments about a bootable optical disk and I may yet have to resort to that but since I’m not sure of the procedural details, I decided to try a couple of alternative ideas which came to mind while reading the replies.
Results 1 to 10 of